Shenzhen Meirui Zhida Technology Co., Ltd.
MRBEST ---- Make The Battery Research Easier
Add to Cart
Pouch Cell Battery Electrolyte Diffusion & Degassing Chamber for Li-Ion Battery Vacuum Standing
Model: MR-JZ300
The electrolyte diffusion & degassing chamber standing box is specifically designed for professional Li-ion Battery Research. It is mainly used for removing air from the electrolyte after it's been injected into the polymer Li-ion cell or after the formation for final sealing under a vacuumed condition.
Features
1. The vacuum remains stable. When holding, the vacuum is not much lower.
2. The product has a multi-stage cycle operation function. Helps the electrolyte to fuse more fully.
3. Through the perspective window, you can observe the changes in the cavity while working.
4. The upper cavity is driven by an air cylinder and guided by two linear guide sleeves, which can move up and down flexibly, and the guidance is accurate to ensure the product tightness requirements.
5. It can be applied to batteries of different specifications, and the adjustment is simple and convenient.
6. The main machine and the control box are separated design, so that the machine can work in the glove box or on the assembly line.
7. Easy operation, beautiful appearance, small size and light weight.
Specifications
| Model No. | Electrolyte Diffusion Chamber MR-JZ300 |
| The cavity is made of aluminum alloy, which is corrosion resistant and has a firm structure | |
| Standing time can be set to 0-9999S, adjustable, and pressure adjustable | |
| Vacuum degree can reach above -95KPa (the buyer prepares the vacuum pump) | |
| Good sealing performance, which can ensure that the air leakage in 1 minute does not exceed -1KPa | |
| Power supply | 220V/50Hz; power: 100W |
| Compressed air source | 0.5～0.8Mpa; when used in the glove box, the cylinder power source must use the working gas 0.5～0.8Mpa used in the glove box |
| Volume in the cavity | L320mm*W320mm*H175mm |
| Part of performing cavity action | about L510mm*W355mm*H635mm |
| Control part | about L465mm*W355mm*H345mm |
| Weight | about 60K |
Picture for Reference
MRBEST Factory Show
Shenzhen Meirui Zhida Technology Co., Ltd
Manufacturer Vendor for Lithium Battery Equipment in Shenzhen China
MRBEST Engineers has over 20 years experience in Lithium-ion Battery Researching and Manufacturing!
MRBEST International Sales Team has over 10 years export experience
24*7 Online after-sale dept and quick response!
Provide complete solution for Battery & Material Research Equipment
MRBEST Factory with ISO Certificate and products are CE approved